Please wait while the page loads...

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your MINI Hardtop 2 Door is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few disparate ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your MINI Hardtop 2 Door. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name plentiful. With that being said, the check engine light can represent a variety of other things. It can be as pure as your gas cap being loose or as unhealthy as engine knocking. If your check engine light is on in your MINI Hardtop 2 Door, contact Crown MINI of Richmond. Contact Crown MINI of Richmond today! Our MINI service department can aid you find out what code is turning your check engine light on or observe why your check engine light is flashing.

MINI Hardtop 2 Door Check Engine Light Flashing

Although there are many ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot usual causes including something as uncomplicated as a loose gas cap. Other usual reasons for a Check Engine Light are a malfunction with the fuel injection system, dirty mass airflow sensor, faulty head gasket, damaged oxygen sensor, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the MINI Certified Technicians and the certified service protocol to isolate the root problem and repair it as essential to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your MINI issue was fixed.

Every MINI Hardtop 2 Door was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is liable nor what to do about it. That’s where we come in; Crown MINI of Richmond provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Greatly Qualified Service licensed.

Will the check engine light reset itself?

The check engine light on your MINI Hardtop 2 Door will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going acceptable, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your MINI Hardtop 2 Door light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Crown MINI of Richmond so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a MINI Hardtop 2 Door?

When your check engine light comes on, this could be as plain as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a alarming problem that could cause alarming damage to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow frequently means something less alarming but a flashing check engine light hints that your vehicle’s engine is in alarming trouble and service is needed instantly. If your check engine light is flashing in your MINI Hardtop 2 Door, we excessively recommend not to drive the vehicle and schedule MINI service straightaway. Below is a list of the most plain reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your MINI Hardtop 2 Door’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown MINI of Richmond offers a complimentary multi-point inspection with every MINI service. If you have an issue with your catalytic converter and don't get it repaired, your MINI Hardtop 2 Door will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your MINI Hardtop 2 Door if it’s not installed properly. These aftermarket components and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound ongoing, bring your Hardtop 2 Door to MINI and have our company of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM components first place might cost a slight bit more but could save you money from having to get poor function and wear and tear caused by poor installation function corrected.
  • One of the most fair and countless cause is that your MINI Hardtop 2 Door gas cap is loose, damaged or missing. The gas cap for your MINI Hardtop 2 Door serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is aged or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on hastily after you put gas in your MINI Hardtop 2 Door, first thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • The battery is low or dead. The battery in your MINI Hardtop 2 Door is every precarious. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of MINI you drive, but check our ongoing service coupons and specials.
  • Your MINI Hardtop 2 Door has a vacuum leak. Every MINI Hardtop 2 Door has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, especially if they’re exposed to efficient heat or extreme heated.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, accepted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer direct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your MINI Hardtop 2 Door's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right collection of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • New Spark Plugs or Plug Wires are essential for your MINI Hardtop 2 Door. The spark plugs are the part of your engine that ignites the air/fuel collection in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or aged, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, primary to more expensive repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your MINI Hardtop 2 Door is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to obvious changes, like altitude. If your MINI Hardtop 2 Door is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.

MINI Hardtop 2 Door Check Engine Light

If the check engine light in your MINI Hardtop 2 Door starts flashing, that means that the problem needs sudden attention and your MINI should be brought in instantly. A flashing light indicates that the problem is relentless and if not taken care of instantly may result in leading damage to the vehicle. This glaring light usually indicates a harsh engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can promptly expand the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A detrimental, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair. If your check engine light is glaring, please contact our team of automotive experts at Crown MINI of Richmond urgently by calling 8042078385.

Is it safe to drive your MINI Hardtop 2 Door with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is commonly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more precarious problem. If the check engine light is shining, this means that there is a precarious issue and it is recommended to service your MINI Hardtop 2 Door hastily. Call the experts at Crown MINI of Richmond by dialing 8042078385 so you can describe the issues. Or reduce your speed and bring your MINI to our certified mechanics as soon as conceivable.

Check Engine Light Service MINI Hardtop 2 Door

What do you do when you’re driving along in your MINI Hardtop 2 Door and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most MINI owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your MINI Hardtop 2 Door checked as soon as attainable. Ignoring that warning could end up causing major damage to expensive engine components.

When your MINI Hardtop 2 Door's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is opt for with an electronic investigate tool that is used by our MINI auto repair mechanics at Crown MINI of Richmond. There are also a number of rather inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained professional to opt for the issue and repair it.

MINI Hardtop 2 Door Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Hardtop 2 Door. There are hundreds of contrasting codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling prime diagnostics will give you agreeable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, exceptional and accessible vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of coherent OBD codes, there are also hundreds of coherent reasons for the light, including:

  • Transmission issues
  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues
  • Ignition system faults
  • Fuel and air metering systems problems
  • Bad Spark Plugs
  • Old Battery
  • O2 Sensor

This is why it is decisive for someone who does not have various of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified MINI mechanic. If the engine light comes on due to a severe concern, you risk damaging your car extra by not repairing the issue right away. Call Crown MINI of Richmond at 8042078385 today or schedule your check engine light service online today!

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be interchanged. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is twinkling, we advise that you pull over and contact Crown MINI of Richmond to help opt for if your vehicle is compatible to drive in or if we advise a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not well tightened to a more memorable failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it profound to get the cogent code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is constantly between $88 and $111. The profound news, Crown MINI of Richmond offers complimentary multi-point inspections and free diagnostics, in most cases, to help choose the cause of your check engine light.